Mytek Europe 2021 / Brooklyn Bridge firmware version 1.52 !! IMPORTANT !! We highly recommend performing updates over-the-air whenever it is possible. - connect device to your local network, preferably via Ethernet cable - make sure that your internet connection is stable - navigate to the 'Device Info' screen in the device's menu and click the 'Update' tile. The tile wil be active if at least one of two updates is available. - confirm your intention and the update process will begin. Device will automatically update its own firmware along with firmware of the Network Module to the latest revisions. If all of the updates are succesfull, the device will reboot automatically. In case of update failure or if you want to update from revision below 1.10: To update Brooklyn Bridge firmware to the latest revision an installed the Mytek Control Panel is required. The update can be performed on Windows 7,8,10 and OSX Yosemite / El Capitan / Sierra / High Sierra / Mojave. How to update the firmware: Start Mytek Control Panel application. The program ("General" tab / "Firmware" section) will show you the current revision of your unit, and whether it needs an update or not. If so, then simply press the "Load firmware file" button to find the desired firmware file. Next click "Update" button. A progress bar will indicate when the flash process is finished.The DAC will reset itself. Before using restore the Brooklyn Bridge to factory settings. A reboot of the computer is not necessary. When the update fails: Press and hold the first from the left button and turn the Brooklyn Bridge on. The device will start in Bootloader mode - "MYTEK" logo is fading in and out. The flash process should then be tried again. Firmware revision history: v1.52 / 2021-05-10 needs firmware v.3.7.52 or above in network module - fixed: MQA decoder is not recognized over USB - fixed: USB volume causes stall after wake up - fixed: DSD based on 48k is shown as "no lock" - added wifi support to devices in Japan - added Japan Cert information on device info screen v1.51 / 2021-02-15 needs firmware v.3.7.52 or above in network module - automatic downgrade disabled v1.50 / 2021-02-12 needs firmware v.3.7.52 or above in network module - changed contact information - added hem logo - added support for buttons on Simple Screen with following functions (from left): - 1st Change input (left) - 2nd Change input (right) - 3rd Mute on/off or Play/Pause (network only) - 4th Change Output HP/Main. Hold to restore automatic selection. v1.44 / 2020-07-22 needs firmware v.3.7.52 or above in network module - fixed: no output signal after startup when Analog Volume Control is chosen - fixed: sometimes there is wrong sample rate when playing tidal through roon v1.43 / 2020-05-04 needs firmware v.3.7.52 or above in network module - internal improvements and minor bugfixes v1.42 / 2020-03-28 needs firmware v.3.7.52 or above in network module - internal improvements and minor bugfixes v1.41 / 2020-01-27 needs firmware v.3.7.52 or above in network module - fixed: wrong recognitioning of SPDIF signal resolution for consumer format v1.40 / 2019-12-12 needs firmware v.3.7.52 or above in network module - improved cover art view logic - fixed bug: update error after updating both device's and network module's firmwares - effective in future updates v1.30 / 2019-12-05 needs firmware v.3.7.52 or above in network module - added feature: album cover art and track title can be displayed on the Simple Screen instead of file format when using network input - fixed bug: wrong synchronization when switching from USB to network input v1.20 / 2019-11-18 needs firmware v.3.7.48 or above in network module - fixed incidental misbehavior of the MQA indicator when MQA decoder is disabled - improved gapless playback via network - adjustment to Japan's law requirements v1.10 / 2019-07-16 needs firmware v.3.7.29 in network module - added Access Point (AP) mode, which can be used to setup Wi-Fi network connection via mConnect control app. It is automaticly enabled after power up when no connection is established. BB creates new Wi-Fi network with SSID "Brooklyn Bridge xxxxxxxxx" and password "password" - added possibility to disable network module (streamer power: off) - changed play/pause remote button behavior to play/pause music from streamer or mute DAC for another inputs. Long press play/pause button for on/off the DAC. - improved behavior of Wi-Fi networks list when there is more than can be displayed on the display - fixed waking up the device from Roon (Roon is trademark of Roon Labs LLC) - added possibility to update device firmware directly from the device (device OTA update). It is done from device info screen. - added indicator of firmware update availability - fixed update screen issues - fixed displaying a mainboard firmware version at Device Info screen - fixed hangup after starting update from network when USB is connected. - fixed getting IP address - a lot of GUI reworked, added some animations, better status indication etc. - fixed a lot of internal and minor bugs v1.01 / 2019-04-11 - fixed: disappearing list of Wi-Fi networks (in environments with many available networks) v1.00 / 2019-03-07 - the first official release. Copyright HEM Sp. z o.o. 05/2021 All rights reserved. Windows 7/8/10 are trademarks of Microsoft Corporation. OSX Yosemite, El Capitan, Sierra, High Sierra, Mojave are trademarks of Apple Inc.